The Warmup® Foil Heater is a streamlined electric radiant floor heater designed for use with carpet, vinyl, wood and other floating floors. We recommend using the Warmup Insulated Underlay and Dual Overlay Systems for maximum efficiency (excludes bathrooms; cannot steam clean carpets). Warmup has successfully completed controlled tests with Amtico and Karndean flooring.
Warmup® WLFH-140W/210 Details
Warmup® foil heater underfloor heating is simple to install and can be used underneath a large number of flooring types. It is designed to deliver a consistent and even heat distribution, and can also be used in wet areas without the need for additional earth grids.
Warmup electric underfloor heating can provide warmth throughout the whole room within minutes, rather than hours, and will avoid overheating or energy wastage.
Key Features of the Warmup® Foil Heater System
- Easily installed under floor finish with no self-levelling required
- Wire based system can be adapted to fit around objects
- Fully earthed flat aluminium foil will not raise floor levels
- Ideal for heating under floating floors such as laminate and hardwood
- Single connection lead allows faster installation
- Foil system must be used with Warmup Insulated Underlay
- Foil system must be used with Warmup Dual Overlay when laying vinyl or carpet
- Output rating: 100W/m²
- Mat Width: 0.5m
- Mat Length: 3m
- Cold tail length: 3m
- Heating cable spacing: 50mm
- Approvals: CE mark
- BEAB Approved
- 15 Year warranty
- Never cut the cable
How to install the Warmup® Foil Heater system
(refer to installation manual above for complete instructions)
The foil heating mats are available in several convenient sizes but it is recommended to use larger mats as much as possible and smaller mats as gap fillers. Permanent or static fixtures should be excluded with ideally 80% of the floor area covered.
The mat (foil casing) can be cut and turned to suit the shape of the room, however the wire MUST NEVER BE CUT The aluminium foil tape can then be used to secure the mat once its been re-positioned, securing any exposed wire.
When laying the mat a gap of 50mm should be left from the wall edge and a gap of 10mm between mats. The mats should be stretched and secured using the aluminium tape provided. The mats electrical supply cables should be placed towards the junction box, ensuring that they DO NOT CROSS each other.
Please Note: All electrical connections MUST be performed by a certified electrician.
A groove should be created in the subfloor in order to accommodate for the floor probe. The probe must NEVER touch or be crossed by the heating element.
Free delivery on all orders over £99
This product will be dispatched within .
We deliver to the United Kingdom only.
Not happy with your product? You can return it within 14 days.
Need help choosing the right product?
Our staff is happy to help
Are you a professional?
Open a trade account with us, and enjoy fantastic benefits.